汾渭平原农户冬小麦氮磷养分投入调查与分析

为明确汾渭平原农户冬小麦施肥现状，并指导农户合理施肥，在汾渭平原冬小麦种植区选取22个区/县，连续2年进行农户冬小麦产量及氮、磷养分投入调查。结果表明，汾河平原和渭河平原农户冬小麦平均产量分别为6 949和6 442 kg·hm^-2，其中中等产量水平（5 500 kg·hm^-2）以上的农户超过80%。汾河平原农户冬小麦N和P₂O₅的平均投入量分别为272.6和139.1 kg·hm^-2，施氮不足、适中和过量的农户分别占11.84%、23.68%和64.47%，施磷不足、适中和过量的农户分别占14.03%、7.89%和78.07%。渭河平原农户N和P₂O₅的平均投入量分别为196.3和147.2 kg·hm^-2，施氮不足、适中和过量的农户分别占 28.63%、31.97%和39.40%，施磷不足、适中和过量的农户分别占5.95%、14.50%和79.56%。汾河平原农户冬小麦氮肥基肥和追肥比例分别为60.3%和39.7%，而渭河平原农户冬小麦氮肥基肥和追肥比例分别为 97.3%和2.7%。此外，汾河平原农户冬小麦N、P₂O₅的平均偏生产力分别为30.4和59.6 kg·kg^-1，渭河平原农户冬小麦N、P₂O₅的平均偏生产力分别为38.4和56.1 kg·kg^-1。总之，在汾渭平原农户冬小麦种植过程中，氮、磷肥过量施用依然严重，导致肥料利用率低，因此，未来需进一步加强对农民的宣传培训，使其科学合理施肥，促进农业绿色发展。     

不同制剂处理对水稻秧苗素质的影响

盆栽试验结果显示,用漯效王1 000、1 200、1 500、2 000倍液浸种甬优12(籼粳杂交稻)和中浙优1号(籼型杂交稻)种子,2个水稻品种的种子发芽率、根长、胚芽长均与清水对照无明显差异。在不施化肥的情况下用漯效王喷施叶面,2个品种的株高、根长、地上部鲜质量、地下部鲜质量、叶绿素相对含量与清水对照也无明显差异。在对处理组施尿素后用漯效王喷施叶面,而对清水、普绿通、可杀得叁仟处理组只施尿素的情况下,漯效王处理的水稻株高、地上部鲜质量、地下部鲜质量、叶绿素相对含量明显优于清水对照、普绿通、可杀得叁仟处理。叶面喷施后14d,漯效王处理组各指标依旧优于对照组。综合试验结果表明,漯效王在与尿素配合施用的情况下能够达到促进肥效、抗虫、促进根部和植株生长、促进分蘖的作用,并且药效持久性好。     

食品安全国家标准GB 2763—2016对葡萄的新要求

《食品安全国家标准 食品中农药最大残留限量》(GB 2763—2016)对食品中农药残留的种类、最大残留限量及检测方法均提出了较多的新要求。对新标准中涉及葡萄或浆果类水果规定的变化进行了归纳,并与国际上的相关标准进行对比,旨在为有关产业的发展提供参考。     

稻麦化学农药减量控害技术集成与示范

采用试验示范,通过农业防治、物理防治、生物防治、科学用药等多种途径控制稻、麦病虫害,集成稻、麦化学农药减量控害技术,实现病虫综合治理、保护生态环境。     

丁硫克百威在豇豆不同时期施用的降解代谢研究

为明确丁硫克百威在豇豆播种期、苗期、结荚期使用后的降解代谢,以及可能产生的膳食风险,分别以其在蔬菜上登记的最低剂量、最高剂量、最高剂量的1.5倍3种剂量施药,进行田间模拟残留试验。将采集的成熟豇豆通过乙腈提取、C18分散净化,经超高效液相色谱串联质谱方法检测,测定豇豆中丁硫克百威及其代谢物——克百威和3-羟基克百威的残留量。结果表明,丁硫克百威、克百威和3-羟基克百威在豇豆中的定量限均为0.01 mg·kg^-1,在0.01~1 mg·kg^-1的添加水平下,丁硫克百威、克百威和3-羟基克百威的平均回收率为72%~105%,相对标准偏差为1.4%~20.1%。丁硫克百威使用后的超标风险主要源于其代谢物——克百威和3-羟基克百威。播种期施药后的豇豆样品均无丁硫克百威及其代谢物检出;苗期以最高剂量的1.5倍施药后,第10天的样品中克百威(含3-羟基克百威)的残留值超出中国国家标准中规定的最大允许残留限量(MRL);结荚期2次或3次施药后7 d内克百威(含3-羟基克百威)的残留值超出MRL。结荚期施药时,丁硫克百威在2次施药和3次施药后的慢性膳食摄入风险和急性膳食摄入风险均较低,小于100%;但克百威(含3-羟基克百威)的急性膳食摄入风险较高,以最高剂量的1.5倍2次施药或3次施药后,克百威(含3-羟基克百威)的急性膳食摄入风险于药后7 d才降至100%以下。综上,播种期使用丁硫克百威不会导致豇豆中残留超标,可以安全使用;但苗期和结荚期使用丁硫克百威存在极高的风险,应禁止其在播种期以外的使用。     

Ace and ace-like genes of invasive redlegged earth mite: copy number variation,target-site mutations,and their associations with organophosphate insensitivity

Background

Invasive Australian populations of redlegged earth mite, Halotydeus destructor (Tucker), are evolving increasing organophosphate resistance. In addition to the canonical ace gene, the target gene of organophosphates, the H. destructor genome contains many radiated ace-like genes that vary in copy number and amino acid sequence. In this work, we characterise copy number and target-site mutation variation at the canonical ace and ace-like genes and test for potential associations with organophosphate insensitivity. This was achieved through comparisons of whole-genome pool-seq data from alive and dead mites following organophosphate exposure.

Results

A combination of increased copy number and target-site mutations at the canonical ace was associated with organophosphate insensitivity in H. destructor. Resistant populations were segregating for G119S, A201S, F331Y at the canonical ace. A subset of populations also had copy numbers of canonical ace > 2, which potentially helps overexpress proteins carrying these target-site mutations. Haplotypes possessing different copy numbers and target-site mutations of the canonical ace gene may be under selection across H. destructor populations. We also detected some evidence that increases in copy number of radiated ace-like genes are associated with organophosphate insensitivity, which might suggest potential roles in sequestration or breakdown of organophosphates.

Conclusion

Different combinations of target-site mutations and (or) copy number variation in the canonical ace and ace-like genes may provide non-convergent ways for H. destructor to respond to organophosphate selection. However, these changes may only play a partial role in organophosphate insensitivity, which appears to have a polygenic architecture. © 2023 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Challenges and opportunities of unmanned aerial vehicles as a new tool for crop pest control

The application of pesticides is not simply delivering chemicals to the target area. It also involves considering the negative aspects and developing strategies to deal with them during the application process, to ensure the maximization of pesticides use efficiency and the maintenance of the ecosystem. Unmanned aerial vehicle (UAV) sprayers demonstrate unique advantages compared to traditional ground sprayers, particularly in terms of maneuverability and labor intensity reduction, showed great potential for chemical application in pest control. It is undeniable that there exist challenges in the practice of UAV spraying, such as higher potential risks of pesticide drift or pathogen transmission, uncertainty canopy deposition for different crops, and unexpected leaf breakage induced by downwash flow. Maximizing the utilization of downwash flow while avoiding lateral air movement outside the intended target crop area is a major issue for chemical application with UAV sprayers, particularly in light of the increasingly apparent consensus on the need for enhanced environmental protection during the chemical application process. It must be considered that the operation strategy in different scenarios and for different crop targets is not the same, unique requirements should be given on nozzle atomization, flight parameters, adjuvants and aircraft types in specific working situations. In future, the implementation of spray drift prediction, technical procedures development, and other solutions aimed at reducing pesticide drift and improving deposition quality, is expected to promote the adoption of UAV sprayers by more farmers. © 2023 Society of Chemical Industry.